Most computers ship with a 1Gbps NIC (and not a 10G card) and this means that many SFP+ modules will not connect properly in a mixed NIC speed environment.
Make sure to check the spec of your computer network interface card (NIC) to find what transfer speed it provides you.
Below is a list of verified hardware to use for iXM 1Gbps Direct-IP connection where there is no switch or hardware between camera/computer.
(For direct-IP connection make sure you set the correct IP and netmask on both computer NIC and Camera, a default gateway is not needed.)
There are many modules on the market that are not working properly
All tests we have done were done with hardware from: www.SFPcables.com
Working (for 1G):
Mikrotik S+RJ10 Rev 2 https://mikrotik.com/product/s_rj10
FS SFP-10G-T :: 10BASE-T SFP+ 30m https://www.fs.com/de-en/products/66613.html
Optcore SFPP-T :: 10GBASE-T 30m https://www.optcore.net/product/10g-sfpp-t-bro/
(UNCONFIRMED) 10Gtek ASF-10G-T https://www.10gtek.com/SFP+-Copper-Transceiver-10GBase-T--Cat-6a-7--30M-297.html
Not working (for 1G):
Ubiquiti UF-RJ45-10G :: 10G SFP+ copper RJ45 30m https://store.ui.com/products/uf-rj45-10g-1
Edgeoptic 10G-SFP-T-CI :: 10G-T Module RJ45 30m https://edgeoptic.com/products/sfp_plus/10g-sfp-t/
DELL SFP-1G-T :: https://www.dell.com/en-us/work/shop/dell-networking-transceiver-sfp-1000base-t-up-to-100-m/apd/407-bbos/networking
NETGEAR 1G/10G BASE-T AXM765 :: https://www.netgear.com/dk/business/wired/switches/accessories/axm765/