Views:

Title

 Link Version Updated Comments
P3 DJI Gimbal
Gremsy/P3-Firmware: Firmware used to interface with Phaseone Camera via COM4.
v7.6.0 Official 13/10/21  
P3 DJI Video Converter P3-DJI-VC-FW v1.0.6.5 13/10/21  
P3 DJI gBox P3-DJI-GBOX-FW v01.00.02 13/10/21  
iXM Firmware
iXM - FW
v4.20.24 22/09/21  
DJI UAV FW Update via DJI Pilot App on the controller v03.00.01.01 15/10/21  
DJI Smart controller Update via DJI Pilot App v03.00.01.02 15/10/21  
DJI Pilot App Update via DJI Pilot App on the controller V3.0.1.4(M300) 15/10/21  
DJI Skyport V2 Update via DJI Pilot App on the controller v01.03.02.00 15/10/21  
Intelligent Fight Battery Update via DJI Pilot App on the controller or Through the Battery station and Controller
v01.02.05.31
18/10/21  
Intelligent Battery Station Update via DJI Pilot App on the controller and a USB cable
v03.00.01.01
18/10/21  
D-RTK 2 Mobile Station for Matrice Update via DJI Assistant 2 Enterprise Series v03.00.00.12 (D-RTK 2 Mobile Station: v02.02.0505) 18/10/21 When
connecting D-RTK2 to DJI Assistant shows a older version to downgrade:
v02.02.0505, release notes show this versions: v03.00.00.16 (D-RTK 2
Mobile Station: v02.02.0505) however the version v03.00.00.16 is not
available for install from DJI Assistant software.
DJI Assistant 2 Enterprise Series https://www.dji.com/dk/matrice-300/downloads v2.1.2 18/10/21  

As there are many different parts of this system which can be updated individually we have put together a list of tested firmware which we support when used together.

Although other combinations may work below is Phase Ones recommendation:

 

You can find the firmware package in the following link.

 

 
   

If you have any other questions you can contact Support!

Keywords: M300, P3, Firmware