Summary
Set custom function 9 to 1, and custom function 12 to 1, and custom function 10 to 2.
In-Depth
Autofocus on the Phase One DF/DF+ body can be driven with the AEL dial just
above the rear dial.
Step1:
Set custom Function 9 to 1 (Swap function of AEL and AFL buttons) - see image below.
NOTE: Camera must be in Custom Bank A, B, or C!
Step 2:
Change Custom function 12 to 1 (AFL to AF operation)
The half press will still also control auto focus.
You can lock the focus by holding down the AEL button while triggering.
Step 3:
You can also disable the Half Press function. To disable the Half Press function change Custom Function 10 to 2
Workflow suggestion:
- Change CF 9,10 and 12 as shown above.
- To activate AF on the AEL button - leave CF bank A,B or C and select Exposure mode X,M,Tv,Av or P.
- Copy settings to C1,C2 or C3:
- Hold down +/- button and change Exposuremode dial to C1,C2 or C3. Once selected - release the +/- button.
- Make sure your lens is set to AF and the body is set to S or C
To reset Custom Functions press the +/- button for 3-5 seconds. Small "beep" all custom functions is reset.