Summary
Instruction are below on how to update firmware on an Aptus II digital back.
In-Depth
Contact support for this firmware
To Install:
Mac - Capture One:
1. Locate the Capture One application folder and open it.
2. Right click the Capture One application and select “Show Package Contents
3. Navigate to Contents XPC Services and right click on “CaptureCoreServer. Select “Show Package Contents”
4. Navigate to Contents/Frameworks/CaptureCore/Leaf/LeafSDK/LeafSDK.framework/Versions/A/Firmware
5. Make a backup copy of the “Firmware” folder and store it in case you need to revert to it.
6. Copy the entire contents of the 5.048 folder into the “Firmware” folder. Select the Overwrite option.
7. Close all the windows.
8. Launch Capture One and connect the back.
9. The software will update the firmware.
Windows-Capture One
1. Locate C:\Program Files\Phase One\Capture One 7\CaptureProcess\CaptureCore\Leaf\LeafSDK\Firmware
2. Make a backup copy of the “Firmware” folder and store it in case you need to revert to it.
3. Copy the entire contents of the 5.047 folder into the “Firmware” folder. Select the Overwrite option.
4. Close all the windows.
5. Launch Capture One and connect the back.
6. The software will update the firmware.
To revert to 5.041:
1. Copy your backup Firmware folder to the location as above.
2. Take out of the folder or rename the following file: Firmware.config to e.g. Firmware.config.version
3. Launch Capture One or Leaf Capture and connect the back.
4. The software will update the firmware.
5. Copy the Firmware.config file back to the Firmware folder or rename it to its original name.
6. Close all the windows.
Mac - Leaf Capture:
1. Locate the Leaf Capture 11.5.3 application folder and open it.
2. Right click the Leaf Capture 11.5.3 application and select “Show Package Contents”.
3. Navigate to Contents/Frameworks/Leaf.sdk framework/Versions/A/Firmware
4. Make a backup copy of the “Firmware” folder and store it in case you need to revert to it.
5. Copy the entire contents of the 5.048 folder into the “Firmware” folder. Select the Overwrite option.
6. Close all the windows.
7. Launch Leaf Capture and connect the back.
8. The software will update the firmware.